Voopoo - PnP Coils

Voopoo PnP Replacement Coils

The PnP platform is the reason so many people stay with Voopoo: one coil fitting spans the Drag and Vinci ranges, so upgrading your device does not strand your spares. The range runs from a tight 1.2Ω mouth-to-lung coil right up to a 0.15Ω mesh, which means the same kit can give you a cigarette-like draw on nic salts or full sub-ohm clouds depending on which coil you drop in.

Key Features:

• Fits the whole PnP platform - Drag and Vinci series

• Six resistances from 1.2Ω MTL to 0.15Ω sub-ohm mesh

• Press-fit design - no threading, the coil pushes straight into the pod

• Mesh builds on the VM and TM coils for faster ramp-up and better flavour

• Organic cotton wicking

• Sold in packs, so you are not reordering every fortnight

Coil Options & Specifications:

• PnP-TR1 1.2Ω Regular Coil: 10–15W, the tightest draw in the range, and the one to pick for 20mg nic salts

• PnP-R2 1.0Ω Dual Coil: 10–15W, a mouth-to-lung draw with a touch more warmth than the TR1

• PnP-TM2 0.8Ω Single Mesh: 12–18W, the middle ground - looser than MTL, still gentle on liquid

• PnP-VM1 0.3Ω Single Mesh: 32–40W, the step up into sub-ohm, warm without being fierce

• PnP-VM5 0.2Ω Mesh: 40–60W, proper clouds and a warm, open draw

• PnP-VM6 0.15Ω Mesh: 60–80W, the most vapour in the range, and the thirstiest for both liquid and battery

Fits:

Drag X, Drag S, Drag Max, Drag E60, Vinci, Vinci X, Vinci Q and Vinci Air.

Package Contents:

• 5 x Voopoo PnP Replacement Coils (VM1 supplied singly)

Before You Buy:
PnP and PnP X are not the same coil. The later Drags - X2, S2, X3, S3, Drag 5 - take PnP X cartridges and will not accept these. If you are unsure which your device uses, our coil finder will tell you from the device name.

Match the coil to your liquid, not just your device: anything at 0.3Ω or below wants high-VG liquid at 3mg or 6mg, and running 20mg salts through a sub-ohm coil will be unpleasantly harsh. The 1.0Ω and 1.2Ω are the ones for salts.